HyperX IMPACT 16GB (2x8GB) 2400MHz DDR4 260-Pin CL14 SODIMM Laptop Memory Module

Available in capacities of up to 64GB, it features low CL13, CL14 and CL15 latencies, higher memory bandwidth and speeds up to 2666MHz to power through everything. It auto-overclocks for peak performance and runs efficiently at 1.2V.

Optimised for Intel Notebooks;
Optimised for Intel’s Series 100 and 200 chipsets to help future-proof your system. HyperX DDR4 PnP memory will run in most DDR4 systems up to the speed allowed by the manufacturer's system BIOS.

RAM Performance
SPD - 2133 MHz - 1.2 V - CL13 - 13-13-13
Intel Extreme Memory Profiles (XMP 2.0) - 2400 MHz - 1.2 V - CL14 - 14-14-14

Key Features

• Optimised for Intel’s Series 100 and 200 chipsets to help future-proof your system
• Automatic overclocking for a hassle-free boost
• XMP-ready profiles for easy custom tuning
• Low 1.2 standard voltage runs more efficiently
• Slim black thermal label and black PCB
• 100% Factory tested - Total kit capacity is 16GB
• On-Die Termination (ODT)
• Black PCB

Specifications

Module Configuration: 1024 x 64
Voltage: 1.2 V
Type: DRAM
Technology: DDR4 SDRAM
Form Factor: SO-DIMM 260-pin
Module Height (inch): 1.18
Speed: 2400 MHz (PC4-19200)
Latency Timings: CL14 (14-14-14)
Data Integrity Check: Non-ECC
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.25V to 3.6V
On-Die termination (ODT)
16 internal banks; 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Height 1.18" (30.00mm)
CL(IDD) 14 cycles
Row Cycle Time (tRCmin) 45.75ns (min.)
Refresh to Active/Refresh 350ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 29.125ns (min.)
Maximum Operating Power TBD W
UL Rating 94 V - 0
Operating Temperature 0°C to 85°C
Storage Temperature -55°C to +100°C

Box Contents

1 x HyperX Impact 16GB (2 x 8GB) 2400MHz DDR4 SODIMM Memory